Re: [PHP-DEV] default charset confusion
Posted by Stas Malyshev
|
Stas Malyshev
Re: [PHP-DEV] default charset confusion March 12, 2012 08:20AM |
Hi!
> What we really need is what we added in PHP 6. A runtime encoding ini
> setting that is distinct from the output charset which we can use here.
> That would allow people to fix all their legacy code to a specific
> runtime encoding with a single ini setting instead of changing thousands
> of lines of code. I propose that we add such a directive to 5.4.1 to
> ease migration.
One more charset INI setting? I'm not sure I like this. We have tons of
INIs already, and adding a new one each time we change something makes
both writing applications and configuring servers harder.
But as the manual says, ISO-8859-1 and UTF-8 are the same for
htmlspecialchars() - is it wrong? If yes, what exactly is the different
between old and new behavior? I tried to read #61354 but could make
little sense out of it, it lacks expected result and I have hard time
understanding what is the problem there. Could you explain?
--
Stanislav Malyshev, Software Architect
SugarCRM: http://www.sugarcrm.com/
(408)454-6900 ext. 227
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> What we really need is what we added in PHP 6. A runtime encoding ini
> setting that is distinct from the output charset which we can use here.
> That would allow people to fix all their legacy code to a specific
> runtime encoding with a single ini setting instead of changing thousands
> of lines of code. I propose that we add such a directive to 5.4.1 to
> ease migration.
One more charset INI setting? I'm not sure I like this. We have tons of
INIs already, and adding a new one each time we change something makes
both writing applications and configuring servers harder.
But as the manual says, ISO-8859-1 and UTF-8 are the same for
htmlspecialchars() - is it wrong? If yes, what exactly is the different
between old and new behavior? I tried to read #61354 but could make
little sense out of it, it lacks expected result and I have hard time
understanding what is the problem there. Could you explain?
--
Stanislav Malyshev, Software Architect
SugarCRM: http://www.sugarcrm.com/
(408)454-6900 ext. 227
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Laruence
Re: [PHP-DEV] default charset confusion March 12, 2012 08:40AM |
On Mon, Mar 12, 2012 at 3:10 PM, Stas Malyshev <[email protected]> wrote:
> Hi!
>
>
>> What we really need is what we added in PHP 6. A runtime encoding ini
>> setting that is distinct from the output charset which we can use here.
>> That would allow people to fix all their legacy code to a specific
>> runtime encoding with a single ini setting instead of changing thousands
>> of lines of code. I propose that we add such a directive to 5.4.1 to
>> ease migration.
>
>
> One more charset INI setting? I'm not sure I like this. We have tons of INIs
If we will definitely add a run_time_charset in the furture, then I
think it's okey add it now. :)
thanks
> already, and adding a new one each time we change something makes both
> writing applications and configuring servers harder.
> But as the manual says, ISO-8859-1 and UTF-8 are the same for
> htmlspecialchars() - is it wrong? If yes, what exactly is the different
> between old and new behavior? I tried to read #61354 but could make little
> sense out of it, it lacks expected result and I have hard time understanding
> what is the problem there. Could you explain?
>
> --
> Stanislav Malyshev, Software Architect
> SugarCRM: http://www.sugarcrm.com/
> (408)454-6900 ext. 227
>
>
> --
> PHP Internals - PHP Runtime Development Mailing List
> To unsubscribe, visit: http://www.php.net/unsub.php
>
--
Laruence Xinchen Hui
http://www.laruence.com/
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> Hi!
>
>
>> What we really need is what we added in PHP 6. A runtime encoding ini
>> setting that is distinct from the output charset which we can use here.
>> That would allow people to fix all their legacy code to a specific
>> runtime encoding with a single ini setting instead of changing thousands
>> of lines of code. I propose that we add such a directive to 5.4.1 to
>> ease migration.
>
>
> One more charset INI setting? I'm not sure I like this. We have tons of INIs
If we will definitely add a run_time_charset in the furture, then I
think it's okey add it now. :)
thanks
> already, and adding a new one each time we change something makes both
> writing applications and configuring servers harder.
> But as the manual says, ISO-8859-1 and UTF-8 are the same for
> htmlspecialchars() - is it wrong? If yes, what exactly is the different
> between old and new behavior? I tried to read #61354 but could make little
> sense out of it, it lacks expected result and I have hard time understanding
> what is the problem there. Could you explain?
>
> --
> Stanislav Malyshev, Software Architect
> SugarCRM: http://www.sugarcrm.com/
> (408)454-6900 ext. 227
>
>
> --
> PHP Internals - PHP Runtime Development Mailing List
> To unsubscribe, visit: http://www.php.net/unsub.php
>
--
Laruence Xinchen Hui
http://www.laruence.com/
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Rasmus Lerdorf
Re: [PHP-DEV] default charset confusion March 12, 2012 08:50AM |
On 03/12/2012 12:10 AM, Stas Malyshev wrote:
> Hi!
>
>> What we really need is what we added in PHP 6. A runtime encoding ini
>> setting that is distinct from the output charset which we can use here.
>> That would allow people to fix all their legacy code to a specific
>> runtime encoding with a single ini setting instead of changing thousands
>> of lines of code. I propose that we add such a directive to 5.4.1 to
>> ease migration.
>
> One more charset INI setting? I'm not sure I like this. We have tons of
> INIs already, and adding a new one each time we change something makes
> both writing applications and configuring servers harder.
> But as the manual says, ISO-8859-1 and UTF-8 are the same for
> htmlspecialchars() - is it wrong? If yes, what exactly is the different
> between old and new behavior? I tried to read #61354 but could make
> little sense out of it, it lacks expected result and I have hard time
> understanding what is the problem there. Could you explain?
Yes, it is a bit hard to understand from the bug report because
bugs.php.net is all utf-8, but we are talking about non utf-8 apps here.
This script should illustrate it: ( https://gist.github.com/2020502 )
$gb2312 = iconv('UTF-8','GB2312','我是测试');
$string = $string = "<pre><p>$gb2312</p></pre>";
echo htmlspecialchars($string);
If you run that in PHP 5.3 you get:
<pre><p>���Dz���</p></pre>
The garbage-like chars there - if you don't see them, see
https://gist.github.com/2020442 - is the expected output. In PHP 5.4 the
output is nothing. The function recognizes that this is not valid UTF-8
and dumps the entire string.
Ignoring 5.4 for a second, if you in 5.3 do this:
echo htmlspecialchars($string);
echo htmlspecialchars($string, NULL, "ISO-8859-1");
echo htmlspecialchars($string, NULL, "UTF-8");
You will see that the first two output the escaped string with the
GB2312 bytes intact within it and the UTF-8 calls returns false because
it correctly recognizes that GB2312 is not UTF-8. We don't have any such
check for 8859-1, so yes, saying UTF-8 and 8859-1 are the same for
htmlspecialchars() is wrong for PHP 5.3 as well as for 5.4.
And as expected, under 5.4 because the default is now the UTF-8
behaviour only the second echo gives a result.
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> Hi!
>
>> What we really need is what we added in PHP 6. A runtime encoding ini
>> setting that is distinct from the output charset which we can use here.
>> That would allow people to fix all their legacy code to a specific
>> runtime encoding with a single ini setting instead of changing thousands
>> of lines of code. I propose that we add such a directive to 5.4.1 to
>> ease migration.
>
> One more charset INI setting? I'm not sure I like this. We have tons of
> INIs already, and adding a new one each time we change something makes
> both writing applications and configuring servers harder.
> But as the manual says, ISO-8859-1 and UTF-8 are the same for
> htmlspecialchars() - is it wrong? If yes, what exactly is the different
> between old and new behavior? I tried to read #61354 but could make
> little sense out of it, it lacks expected result and I have hard time
> understanding what is the problem there. Could you explain?
Yes, it is a bit hard to understand from the bug report because
bugs.php.net is all utf-8, but we are talking about non utf-8 apps here.
This script should illustrate it: ( https://gist.github.com/2020502 )
$gb2312 = iconv('UTF-8','GB2312','我是测试');
$string = $string = "<pre><p>$gb2312</p></pre>";
echo htmlspecialchars($string);
If you run that in PHP 5.3 you get:
<pre><p>���Dz���</p></pre>
The garbage-like chars there - if you don't see them, see
https://gist.github.com/2020442 - is the expected output. In PHP 5.4 the
output is nothing. The function recognizes that this is not valid UTF-8
and dumps the entire string.
Ignoring 5.4 for a second, if you in 5.3 do this:
echo htmlspecialchars($string);
echo htmlspecialchars($string, NULL, "ISO-8859-1");
echo htmlspecialchars($string, NULL, "UTF-8");
You will see that the first two output the escaped string with the
GB2312 bytes intact within it and the UTF-8 calls returns false because
it correctly recognizes that GB2312 is not UTF-8. We don't have any such
check for 8859-1, so yes, saying UTF-8 and 8859-1 are the same for
htmlspecialchars() is wrong for PHP 5.3 as well as for 5.4.
And as expected, under 5.4 because the default is now the UTF-8
behaviour only the second echo gives a result.
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Rasmus Lerdorf
Re: [PHP-DEV] default charset confusion March 12, 2012 08:50AM |
On 03/12/2012 12:41 AM, Rasmus Lerdorf wrote:
> $string = $string = "<pre><p>$gb2312</p></pre>";
Sorry typo there obviously. Just one $string
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> $string = $string = "<pre><p>$gb2312</p></pre>";
Sorry typo there obviously. Just one $string
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Stas Malyshev
Re: [PHP-DEV] default charset confusion March 12, 2012 09:00AM |
Hi!
> Ignoring 5.4 for a second, if you in 5.3 do this:
>
> echo htmlspecialchars($string);
> echo htmlspecialchars($string, NULL, "ISO-8859-1");
> echo htmlspecialchars($string, NULL, "UTF-8");
>
> You will see that the first two output the escaped string with the
> GB2312 bytes intact within it and the UTF-8 calls returns false because
> it correctly recognizes that GB2312 is not UTF-8. We don't have any such
> check for 8859-1, so yes, saying UTF-8 and 8859-1 are the same for
> htmlspecialchars() is wrong for PHP 5.3 as well as for 5.4.
So the difference is that ISO8859-1 does not validate but UTF-8 validates?
I'm not sure what GB2312 encoding does but isn't it dangerous to do
htmlspecialchars() with wrong encoding? Wouldn't htmlentities() also
produce wrong result when used with wrong encoding?
--
Stanislav Malyshev, Software Architect
SugarCRM: http://www.sugarcrm.com/
(408)454-6900 ext. 227
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> Ignoring 5.4 for a second, if you in 5.3 do this:
>
> echo htmlspecialchars($string);
> echo htmlspecialchars($string, NULL, "ISO-8859-1");
> echo htmlspecialchars($string, NULL, "UTF-8");
>
> You will see that the first two output the escaped string with the
> GB2312 bytes intact within it and the UTF-8 calls returns false because
> it correctly recognizes that GB2312 is not UTF-8. We don't have any such
> check for 8859-1, so yes, saying UTF-8 and 8859-1 are the same for
> htmlspecialchars() is wrong for PHP 5.3 as well as for 5.4.
So the difference is that ISO8859-1 does not validate but UTF-8 validates?
I'm not sure what GB2312 encoding does but isn't it dangerous to do
htmlspecialchars() with wrong encoding? Wouldn't htmlentities() also
produce wrong result when used with wrong encoding?
--
Stanislav Malyshev, Software Architect
SugarCRM: http://www.sugarcrm.com/
(408)454-6900 ext. 227
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Adam Jon Richardson
Re: [PHP-DEV] default charset confusion March 12, 2012 09:11AM |
On Mon, Mar 12, 2012 at 3:52 AM, Stas Malyshev <[email protected]>wrote:
> Hi!
>
>
> Ignoring 5.4 for a second, if you in 5.3 do this:
>>
>> echo htmlspecialchars($string);
>> echo htmlspecialchars($string, NULL, "ISO-8859-1");
>> echo htmlspecialchars($string, NULL, "UTF-8");
>>
>> You will see that the first two output the escaped string with the
>> GB2312 bytes intact within it and the UTF-8 calls returns false because
>> it correctly recognizes that GB2312 is not UTF-8. We don't have any such
>> check for 8859-1, so yes, saying UTF-8 and 8859-1 are the same for
>> htmlspecialchars() is wrong for PHP 5.3 as well as for 5.4.
>>
>
> So the difference is that ISO8859-1 does not validate but UTF-8 validates?
> I'm not sure what GB2312 encoding does but isn't it dangerous to do
> htmlspecialchars() with wrong encoding? Wouldn't htmlentities() also
> produce wrong result when used with wrong encoding?
The EUC-CN encoding appears to ensure compatibility with ascii by avoiding
the ascii range for each of its two bytes, so it seems that
htmlspecialchars should work OK:
http://en.wikipedia.org/wiki/GB_2312#EUC-CN
http://php.net/manual/en/mbstring.supported-encodings.php
Adam
Adam
> Hi!
>
>
> Ignoring 5.4 for a second, if you in 5.3 do this:
>>
>> echo htmlspecialchars($string);
>> echo htmlspecialchars($string, NULL, "ISO-8859-1");
>> echo htmlspecialchars($string, NULL, "UTF-8");
>>
>> You will see that the first two output the escaped string with the
>> GB2312 bytes intact within it and the UTF-8 calls returns false because
>> it correctly recognizes that GB2312 is not UTF-8. We don't have any such
>> check for 8859-1, so yes, saying UTF-8 and 8859-1 are the same for
>> htmlspecialchars() is wrong for PHP 5.3 as well as for 5.4.
>>
>
> So the difference is that ISO8859-1 does not validate but UTF-8 validates?
> I'm not sure what GB2312 encoding does but isn't it dangerous to do
> htmlspecialchars() with wrong encoding? Wouldn't htmlentities() also
> produce wrong result when used with wrong encoding?
The EUC-CN encoding appears to ensure compatibility with ascii by avoiding
the ascii range for each of its two bytes, so it seems that
htmlspecialchars should work OK:
http://en.wikipedia.org/wiki/GB_2312#EUC-CN
http://php.net/manual/en/mbstring.supported-encodings.php
Adam
Adam
|
Rasmus Lerdorf
Re: [PHP-DEV] default charset confusion March 12, 2012 09:20AM |
On 03/12/2012 12:52 AM, Stas Malyshev wrote:
> Hi!
>
>> Ignoring 5.4 for a second, if you in 5.3 do this:
>>
>> echo htmlspecialchars($string);
>> echo htmlspecialchars($string, NULL, "ISO-8859-1");
>> echo htmlspecialchars($string, NULL, "UTF-8");
>>
>> You will see that the first two output the escaped string with the
>> GB2312 bytes intact within it and the UTF-8 calls returns false because
>> it correctly recognizes that GB2312 is not UTF-8. We don't have any such
>> check for 8859-1, so yes, saying UTF-8 and 8859-1 are the same for
>> htmlspecialchars() is wrong for PHP 5.3 as well as for 5.4.
>
> So the difference is that ISO8859-1 does not validate but UTF-8 validates?
> I'm not sure what GB2312 encoding does but isn't it dangerous to do
> htmlspecialchars() with wrong encoding? Wouldn't htmlentities() also
> produce wrong result when used with wrong encoding?
Not sure you can validate 8859-1 since it isn't multibyte, can you? Is
there any byte that is explicitly forbidden in 8859-1?
And yes, it may very well be dangerous to use the wrong charset and now
that we have better support for GB2312 and other asian charsets in the
entities functions in 5.4 it is even more prudent to choose the right
one so we should provide some way to help people get it right short of
changing every call.
Gustavo suggested we could use the multibyte encoding setting.
Unfortunately only zend.script_encoding is available and I think
internal_encoding is closer to what we need here, but that is only
available as mbstring.internal_encoding.
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> Hi!
>
>> Ignoring 5.4 for a second, if you in 5.3 do this:
>>
>> echo htmlspecialchars($string);
>> echo htmlspecialchars($string, NULL, "ISO-8859-1");
>> echo htmlspecialchars($string, NULL, "UTF-8");
>>
>> You will see that the first two output the escaped string with the
>> GB2312 bytes intact within it and the UTF-8 calls returns false because
>> it correctly recognizes that GB2312 is not UTF-8. We don't have any such
>> check for 8859-1, so yes, saying UTF-8 and 8859-1 are the same for
>> htmlspecialchars() is wrong for PHP 5.3 as well as for 5.4.
>
> So the difference is that ISO8859-1 does not validate but UTF-8 validates?
> I'm not sure what GB2312 encoding does but isn't it dangerous to do
> htmlspecialchars() with wrong encoding? Wouldn't htmlentities() also
> produce wrong result when used with wrong encoding?
Not sure you can validate 8859-1 since it isn't multibyte, can you? Is
there any byte that is explicitly forbidden in 8859-1?
And yes, it may very well be dangerous to use the wrong charset and now
that we have better support for GB2312 and other asian charsets in the
entities functions in 5.4 it is even more prudent to choose the right
one so we should provide some way to help people get it right short of
changing every call.
Gustavo suggested we could use the multibyte encoding setting.
Unfortunately only zend.script_encoding is available and I think
internal_encoding is closer to what we need here, but that is only
available as mbstring.internal_encoding.
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Yasuo Ohgaki
Re: [PHP-DEV] default charset confusion March 12, 2012 11:10AM |
Hi
I think following PHP 5.4.0 NEWS entry is misleading.
. Changed default value of "default_charset" php.ini option from ISO-8859-1 to
UTF-8. (Rasmus)
I thought default_charset became UTF-8, so I was expecting
following HTTP header.
content-type text/html; charset=UTF-8
However, I got empty charset (missing 'charset=UTF-8').
So I looked up to source and found the line in SAPI.h
293 #define SAPI_DEFAULT_CHARSET ""
Empty string should be "UTF-8", isn't it?
BTW, empty charset in HTTP header does not mean the default will
be ISO-8859-1, but it let browser guess the encoding is used.
Guessing encoding may cause XSS under certain conditions.
Anyway, I was curious so I've checked ext/standard/html.c and found
/* {{{ entity_charset determine_charset
* returns the charset identifier based on current locale or a hint.
* defaults to UTF-8 */
static enum entity_charset determine_charset(char *charset_hint TSRMLS_DC)
{
int i;
enum entity_charset charset = cs_utf_8;
int len = 0;
const zend_encoding *zenc;
/* Default is now UTF-8 */
if (charset_hint == NULL)
return cs_utf_8;
There are 2 problems.
- php.ini's default_charset should be UTF-8.
- determine_charset() should not blindly default to UTF-8 when there
are no hint.
Old htmlentities/htmlspecialchars actually determines charset from
default_charset/mbstring.internal_encoding/etc. I think old behavior
is better than now.
How about make determine_charset() behaves like 5.3 and set the
SAPI_DEFAULT_CHARSET to "UTF-8"?
Then PHP will behave like as NEWS mentions, htmlentities/htmlspecialchars
default encoding became 'UTF-8' and users will have control for default
htmlenties/htmlspecialchars encoding.
Regards,
--
Yasuo Ohgaki
yohgaki@ohgaki.net
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
I think following PHP 5.4.0 NEWS entry is misleading.
. Changed default value of "default_charset" php.ini option from ISO-8859-1 to
UTF-8. (Rasmus)
I thought default_charset became UTF-8, so I was expecting
following HTTP header.
content-type text/html; charset=UTF-8
However, I got empty charset (missing 'charset=UTF-8').
So I looked up to source and found the line in SAPI.h
293 #define SAPI_DEFAULT_CHARSET ""
Empty string should be "UTF-8", isn't it?
BTW, empty charset in HTTP header does not mean the default will
be ISO-8859-1, but it let browser guess the encoding is used.
Guessing encoding may cause XSS under certain conditions.
Anyway, I was curious so I've checked ext/standard/html.c and found
/* {{{ entity_charset determine_charset
* returns the charset identifier based on current locale or a hint.
* defaults to UTF-8 */
static enum entity_charset determine_charset(char *charset_hint TSRMLS_DC)
{
int i;
enum entity_charset charset = cs_utf_8;
int len = 0;
const zend_encoding *zenc;
/* Default is now UTF-8 */
if (charset_hint == NULL)
return cs_utf_8;
There are 2 problems.
- php.ini's default_charset should be UTF-8.
- determine_charset() should not blindly default to UTF-8 when there
are no hint.
Old htmlentities/htmlspecialchars actually determines charset from
default_charset/mbstring.internal_encoding/etc. I think old behavior
is better than now.
How about make determine_charset() behaves like 5.3 and set the
SAPI_DEFAULT_CHARSET to "UTF-8"?
Then PHP will behave like as NEWS mentions, htmlentities/htmlspecialchars
default encoding became 'UTF-8' and users will have control for default
htmlenties/htmlspecialchars encoding.
Regards,
--
Yasuo Ohgaki
yohgaki@ohgaki.net
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Yasuo Ohgaki
Re: [PHP-DEV] default charset confusion March 12, 2012 11:30AM |
Hi,
I think motivation of
/* Default is now UTF-8 */
if (charset_hint == NULL)
return cs_utf_8;
is for better performance and I think it's good for better performance.
Alternative of my suggestion is introduce new php.ini entry as Rusmus
mentioned.
The name may be "default_html_escape_encoding"?
We should document this behavior very well, since it affects all of
non UTF-8 web sites.
Regards,
--
Yasuo Ohgaki
yohgaki@ohgaki.net
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
I think motivation of
/* Default is now UTF-8 */
if (charset_hint == NULL)
return cs_utf_8;
is for better performance and I think it's good for better performance.
Alternative of my suggestion is introduce new php.ini entry as Rusmus
mentioned.
The name may be "default_html_escape_encoding"?
We should document this behavior very well, since it affects all of
non UTF-8 web sites.
Regards,
--
Yasuo Ohgaki
yohgaki@ohgaki.net
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Laruence
Re: [PHP-DEV] default charset confusion March 12, 2012 01:50PM |
On Mon, Mar 12, 2012 at 6:21 PM, Yasuo Ohgaki <[email protected]> wrote:
> Hi,
>
> I think motivation of
>
> /* Default is now UTF-8 */
> if (charset_hint == NULL)
> return cs_utf_8;
>
> is for better performance and I think it's good for better performance.
> Alternative of my suggestion is introduce new php.ini entry as Rusmus
> mentioned.
>
> The name may be "default_html_escape_encoding"?
Hi:
in consideration of succinctness, I think run_time_encoding is better.
and we should also separate the determine_output_charset and
determine_run_time_charset(there is only one determin_charset now)
thanks
>
> We should document this behavior very well, since it affects all of
> non UTF-8 web sites.
>
> Regards,
>
> --
> Yasuo Ohgaki
> yohgaki@ohgaki.net
>
> --
> PHP Internals - PHP Runtime Development Mailing List
> To unsubscribe, visit: http://www.php.net/unsub.php
>
--
Laruence Xinchen Hui
http://www.laruence.com/
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> Hi,
>
> I think motivation of
>
> /* Default is now UTF-8 */
> if (charset_hint == NULL)
> return cs_utf_8;
>
> is for better performance and I think it's good for better performance.
> Alternative of my suggestion is introduce new php.ini entry as Rusmus
> mentioned.
>
> The name may be "default_html_escape_encoding"?
Hi:
in consideration of succinctness, I think run_time_encoding is better.
and we should also separate the determine_output_charset and
determine_run_time_charset(there is only one determin_charset now)
thanks
>
> We should document this behavior very well, since it affects all of
> non UTF-8 web sites.
>
> Regards,
>
> --
> Yasuo Ohgaki
> yohgaki@ohgaki.net
>
> --
> PHP Internals - PHP Runtime Development Mailing List
> To unsubscribe, visit: http://www.php.net/unsub.php
>
--
Laruence Xinchen Hui
http://www.laruence.com/
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Rasmus Lerdorf
Re: [PHP-DEV] default charset confusion March 12, 2012 04:30PM |
On 03/12/2012 03:05 AM, Yasuo Ohgaki wrote:
> Hi
>
> I think following PHP 5.4.0 NEWS entry is misleading.
>
> . Changed default value of "default_charset" php.ini option from ISO-8859-1 to
> UTF-8. (Rasmus)
Yes, I have fixed that now.
> I thought default_charset became UTF-8, so I was expecting
> following HTTP header.
>
> content-type text/html; charset=UTF-8
>
> However, I got empty charset (missing 'charset=UTF-8').
> So I looked up to source and found the line in SAPI.h
>
> 293 #define SAPI_DEFAULT_CHARSET ""
>
> Empty string should be "UTF-8", isn't it?
No, we can't force an output charset on people since it would end up
breaking a lot of sites.
> - php.ini's default_charset should be UTF-8.
> - determine_charset() should not blindly default to UTF-8 when there
> are no hint.
>
> Old htmlentities/htmlspecialchars actually determines charset from
> default_charset/mbstring.internal_encoding/etc. I think old behavior
> is better than now.
>
> How about make determine_charset() behaves like 5.3 and set the
> SAPI_DEFAULT_CHARSET to "UTF-8"?
PHP 5.3's determine_charset behaves exactly like 5.4's. In 5.3 we have:
if (charset_hint == NULL)
return cs_8859_1;
and in 5.4 we have:
if (charset_hint == NULL)
return cs_utf_8;
So there is no difference in their guessing when there is no hint, the
only difference is that in 5.4 we choose utf8 and in 5.3 we choose
8859-1 in that case.
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> Hi
>
> I think following PHP 5.4.0 NEWS entry is misleading.
>
> . Changed default value of "default_charset" php.ini option from ISO-8859-1 to
> UTF-8. (Rasmus)
Yes, I have fixed that now.
> I thought default_charset became UTF-8, so I was expecting
> following HTTP header.
>
> content-type text/html; charset=UTF-8
>
> However, I got empty charset (missing 'charset=UTF-8').
> So I looked up to source and found the line in SAPI.h
>
> 293 #define SAPI_DEFAULT_CHARSET ""
>
> Empty string should be "UTF-8", isn't it?
No, we can't force an output charset on people since it would end up
breaking a lot of sites.
> - php.ini's default_charset should be UTF-8.
> - determine_charset() should not blindly default to UTF-8 when there
> are no hint.
>
> Old htmlentities/htmlspecialchars actually determines charset from
> default_charset/mbstring.internal_encoding/etc. I think old behavior
> is better than now.
>
> How about make determine_charset() behaves like 5.3 and set the
> SAPI_DEFAULT_CHARSET to "UTF-8"?
PHP 5.3's determine_charset behaves exactly like 5.4's. In 5.3 we have:
if (charset_hint == NULL)
return cs_8859_1;
and in 5.4 we have:
if (charset_hint == NULL)
return cs_utf_8;
So there is no difference in their guessing when there is no hint, the
only difference is that in 5.4 we choose utf8 and in 5.3 we choose
8859-1 in that case.
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Michael Stowe
Re: [PHP-DEV] default charset confusion March 12, 2012 04:50PM |
I think the ini directive, while adding another to the list, may be the
most unobtrusive method to address this issue, at least for developers.
I definitely agree with Rasmus that this could be one of the bigger
headaches in transitioning to 5.4 (for non-UTF8 sites) and unless we can
come up with a better solution, I say let's move forward with it for 5.4.1.
- Mike
On Mon, Mar 12, 2012 at 10:27 AM, Rasmus Lerdorf <[email protected]> wrote:
> On 03/12/2012 03:05 AM, Yasuo Ohgaki wrote:
> > Hi
> >
> > I think following PHP 5.4.0 NEWS entry is misleading.
> >
> > . Changed default value of "default_charset" php.ini option from
> ISO-8859-1 to
> > UTF-8. (Rasmus)
>
> Yes, I have fixed that now.
>
> > I thought default_charset became UTF-8, so I was expecting
> > following HTTP header.
> >
> > content-type text/html; charset=UTF-8
> >
> > However, I got empty charset (missing 'charset=UTF-8').
> > So I looked up to source and found the line in SAPI.h
> >
> > 293 #define SAPI_DEFAULT_CHARSET ""
> >
> > Empty string should be "UTF-8", isn't it?
>
> No, we can't force an output charset on people since it would end up
> breaking a lot of sites.
>
> > - php.ini's default_charset should be UTF-8.
> > - determine_charset() should not blindly default to UTF-8 when there
> > are no hint.
> >
> > Old htmlentities/htmlspecialchars actually determines charset from
> > default_charset/mbstring.internal_encoding/etc. I think old behavior
> > is better than now.
> >
> > How about make determine_charset() behaves like 5.3 and set the
> > SAPI_DEFAULT_CHARSET to "UTF-8"?
>
> PHP 5.3's determine_charset behaves exactly like 5.4's. In 5.3 we have:
>
> if (charset_hint == NULL)
> return cs_8859_1;
>
> and in 5.4 we have:
>
> if (charset_hint == NULL)
> return cs_utf_8;
>
> So there is no difference in their guessing when there is no hint, the
> only difference is that in 5.4 we choose utf8 and in 5.3 we choose
> 8859-1 in that case.
>
> -Rasmus
>
> --
> PHP Internals - PHP Runtime Development Mailing List
> To unsubscribe, visit: http://www.php.net/unsub.php
>
>
--
-----------------------
"My command is this: Love each other as I
have loved you." John 15:12
-----------------------
most unobtrusive method to address this issue, at least for developers.
I definitely agree with Rasmus that this could be one of the bigger
headaches in transitioning to 5.4 (for non-UTF8 sites) and unless we can
come up with a better solution, I say let's move forward with it for 5.4.1.
- Mike
On Mon, Mar 12, 2012 at 10:27 AM, Rasmus Lerdorf <[email protected]> wrote:
> On 03/12/2012 03:05 AM, Yasuo Ohgaki wrote:
> > Hi
> >
> > I think following PHP 5.4.0 NEWS entry is misleading.
> >
> > . Changed default value of "default_charset" php.ini option from
> ISO-8859-1 to
> > UTF-8. (Rasmus)
>
> Yes, I have fixed that now.
>
> > I thought default_charset became UTF-8, so I was expecting
> > following HTTP header.
> >
> > content-type text/html; charset=UTF-8
> >
> > However, I got empty charset (missing 'charset=UTF-8').
> > So I looked up to source and found the line in SAPI.h
> >
> > 293 #define SAPI_DEFAULT_CHARSET ""
> >
> > Empty string should be "UTF-8", isn't it?
>
> No, we can't force an output charset on people since it would end up
> breaking a lot of sites.
>
> > - php.ini's default_charset should be UTF-8.
> > - determine_charset() should not blindly default to UTF-8 when there
> > are no hint.
> >
> > Old htmlentities/htmlspecialchars actually determines charset from
> > default_charset/mbstring.internal_encoding/etc. I think old behavior
> > is better than now.
> >
> > How about make determine_charset() behaves like 5.3 and set the
> > SAPI_DEFAULT_CHARSET to "UTF-8"?
>
> PHP 5.3's determine_charset behaves exactly like 5.4's. In 5.3 we have:
>
> if (charset_hint == NULL)
> return cs_8859_1;
>
> and in 5.4 we have:
>
> if (charset_hint == NULL)
> return cs_utf_8;
>
> So there is no difference in their guessing when there is no hint, the
> only difference is that in 5.4 we choose utf8 and in 5.3 we choose
> 8859-1 in that case.
>
> -Rasmus
>
> --
> PHP Internals - PHP Runtime Development Mailing List
> To unsubscribe, visit: http://www.php.net/unsub.php
>
>
--
-----------------------
"My command is this: Love each other as I
have loved you." John 15:12
-----------------------
|
Stas Malyshev
Re: [PHP-DEV] default charset confusion March 12, 2012 08:50PM |
Hi!
> And yes, it may very well be dangerous to use the wrong charset and now
> that we have better support for GB2312 and other asian charsets in the
> entities functions in 5.4 it is even more prudent to choose the right
> one so we should provide some way to help people get it right short of
> changing every call.
I'm not sure "changing every call" is such a big problem - it's one grep
and one replace, can be done in one line of sed/awk/perl/php probably.
But a bigger issue is here that people insist on using wrong charsets
and expect language to have some magical external defaults that work for
exactly their use case, instead of doing what they should be doing all
along - putting charset right there in the argument.
We need to get people off this mindset fast, since it is not a good one.
Having tons of hidden defaults that modify behavior of functions called
with the same arguments in hundreds of different ways is a coding and
maintenance nightmare. Now if I write htmlspecialchars() I can never be
sure if works right and uses UTF-8 - what if somebody messed with the
INI setting because of some other broken library that required that to work?
--
Stanislav Malyshev, Software Architect
SugarCRM: http://www.sugarcrm.com/
(408)454-6900 ext. 227
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> And yes, it may very well be dangerous to use the wrong charset and now
> that we have better support for GB2312 and other asian charsets in the
> entities functions in 5.4 it is even more prudent to choose the right
> one so we should provide some way to help people get it right short of
> changing every call.
I'm not sure "changing every call" is such a big problem - it's one grep
and one replace, can be done in one line of sed/awk/perl/php probably.
But a bigger issue is here that people insist on using wrong charsets
and expect language to have some magical external defaults that work for
exactly their use case, instead of doing what they should be doing all
along - putting charset right there in the argument.
We need to get people off this mindset fast, since it is not a good one.
Having tons of hidden defaults that modify behavior of functions called
with the same arguments in hundreds of different ways is a coding and
maintenance nightmare. Now if I write htmlspecialchars() I can never be
sure if works right and uses UTF-8 - what if somebody messed with the
INI setting because of some other broken library that required that to work?
--
Stanislav Malyshev, Software Architect
SugarCRM: http://www.sugarcrm.com/
(408)454-6900 ext. 227
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Rasmus Lerdorf
Re: [PHP-DEV] default charset confusion March 12, 2012 08:50PM |
On 03/12/2012 12:40 PM, Stas Malyshev wrote:
> Hi!
>
>> And yes, it may very well be dangerous to use the wrong charset and now
>> that we have better support for GB2312 and other asian charsets in the
>> entities functions in 5.4 it is even more prudent to choose the right
>> one so we should provide some way to help people get it right short of
>> changing every call.
>
> I'm not sure "changing every call" is such a big problem - it's one grep
> and one replace, can be done in one line of sed/awk/perl/php probably.
> But a bigger issue is here that people insist on using wrong charsets
> and expect language to have some magical external defaults that work for
> exactly their use case, instead of doing what they should be doing all
> along - putting charset right there in the argument.
> We need to get people off this mindset fast, since it is not a good one.
> Having tons of hidden defaults that modify behavior of functions called
> with the same arguments in hundreds of different ways is a coding and
> maintenance nightmare. Now if I write htmlspecialchars() I can never be
> sure if works right and uses UTF-8 - what if somebody messed with the
> INI setting because of some other broken library that required that to
> work?
But you can't necessarily hardcode the encoding if you are writing
portable code. That's a bit like hardcoding a timezone. In order to
write portable code you need to give people the ability to localize it.
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> Hi!
>
>> And yes, it may very well be dangerous to use the wrong charset and now
>> that we have better support for GB2312 and other asian charsets in the
>> entities functions in 5.4 it is even more prudent to choose the right
>> one so we should provide some way to help people get it right short of
>> changing every call.
>
> I'm not sure "changing every call" is such a big problem - it's one grep
> and one replace, can be done in one line of sed/awk/perl/php probably.
> But a bigger issue is here that people insist on using wrong charsets
> and expect language to have some magical external defaults that work for
> exactly their use case, instead of doing what they should be doing all
> along - putting charset right there in the argument.
> We need to get people off this mindset fast, since it is not a good one.
> Having tons of hidden defaults that modify behavior of functions called
> with the same arguments in hundreds of different ways is a coding and
> maintenance nightmare. Now if I write htmlspecialchars() I can never be
> sure if works right and uses UTF-8 - what if somebody messed with the
> INI setting because of some other broken library that required that to
> work?
But you can't necessarily hardcode the encoding if you are writing
portable code. That's a bit like hardcoding a timezone. In order to
write portable code you need to give people the ability to localize it.
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Stas Malyshev
Re: [PHP-DEV] default charset confusion March 12, 2012 09:00PM |
Hi!
> But you can't necessarily hardcode the encoding if you are writing
> portable code. That's a bit like hardcoding a timezone. In order to
> write portable code you need to give people the ability to localize it.
No, it's not like timezone at all. I have to support all timezones in a
global app, but I don't have to internally support every encoding on
Earth - having everything internally in UTF-8 works quite well, and a
lot of applications do exactly that - they have everything internally in
UTF-8 and only may convert when importing or exporting the data. I don't
see anything in using UTF-8 throughout the app/library that makes it
non-portable. However, if we allow to change defaults in
htmlspecialchars() etc. that essentially makes having defaults useless
as I'd have so explicitly specify UTF-8 each time - otherwise it's a
gamble what encoding I'd actually get.
--
Stanislav Malyshev, Software Architect
SugarCRM: http://www.sugarcrm.com/
(408)454-6900 ext. 227
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> But you can't necessarily hardcode the encoding if you are writing
> portable code. That's a bit like hardcoding a timezone. In order to
> write portable code you need to give people the ability to localize it.
No, it's not like timezone at all. I have to support all timezones in a
global app, but I don't have to internally support every encoding on
Earth - having everything internally in UTF-8 works quite well, and a
lot of applications do exactly that - they have everything internally in
UTF-8 and only may convert when importing or exporting the data. I don't
see anything in using UTF-8 throughout the app/library that makes it
non-portable. However, if we allow to change defaults in
htmlspecialchars() etc. that essentially makes having defaults useless
as I'd have so explicitly specify UTF-8 each time - otherwise it's a
gamble what encoding I'd actually get.
--
Stanislav Malyshev, Software Architect
SugarCRM: http://www.sugarcrm.com/
(408)454-6900 ext. 227
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Rasmus Lerdorf
Re: [PHP-DEV] default charset confusion March 12, 2012 09:20PM |
On 03/12/2012 12:51 PM, Stas Malyshev wrote:
> Hi!
>
>> But you can't necessarily hardcode the encoding if you are writing
>> portable code. That's a bit like hardcoding a timezone. In order to
>> write portable code you need to give people the ability to localize it.
>
> No, it's not like timezone at all. I have to support all timezones in a
> global app, but I don't have to internally support every encoding on
> Earth - having everything internally in UTF-8 works quite well, and a
> lot of applications do exactly that - they have everything internally in
> UTF-8 and only may convert when importing or exporting the data. I don't
> see anything in using UTF-8 throughout the app/library that makes it
> non-portable. However, if we allow to change defaults in
> htmlspecialchars() etc. that essentially makes having defaults useless
> as I'd have so explicitly specify UTF-8 each time - otherwise it's a
> gamble what encoding I'd actually get.
If everything was UTF-8 we wouldn't have any of these issues.
Unfortunately that isn't the case. The question is what to do with apps
that need to deal with non UTF-8 data. Are we going to provide any help
to them beyond just telling them to convert everything to UTF-8?
We took steps in 5.4 to improve htmlspecialchars to understand more
encodings and we have the concept of script_encoding and
internal_encoding that is used both in the engine and in mbstring.
Currently internal_encoding isn't checked by htmlspecialchars. If you
pass it '' it checks script_encoding and default_charset which is a bit
odd since neither directly relate to the encoding of the internal data
you are feeding to it. So maybe a way to tackle this is to use the
mbstring internal encoding when it is set as the htmlspecialchars
default when it is called without an encoding arg.
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> Hi!
>
>> But you can't necessarily hardcode the encoding if you are writing
>> portable code. That's a bit like hardcoding a timezone. In order to
>> write portable code you need to give people the ability to localize it.
>
> No, it's not like timezone at all. I have to support all timezones in a
> global app, but I don't have to internally support every encoding on
> Earth - having everything internally in UTF-8 works quite well, and a
> lot of applications do exactly that - they have everything internally in
> UTF-8 and only may convert when importing or exporting the data. I don't
> see anything in using UTF-8 throughout the app/library that makes it
> non-portable. However, if we allow to change defaults in
> htmlspecialchars() etc. that essentially makes having defaults useless
> as I'd have so explicitly specify UTF-8 each time - otherwise it's a
> gamble what encoding I'd actually get.
If everything was UTF-8 we wouldn't have any of these issues.
Unfortunately that isn't the case. The question is what to do with apps
that need to deal with non UTF-8 data. Are we going to provide any help
to them beyond just telling them to convert everything to UTF-8?
We took steps in 5.4 to improve htmlspecialchars to understand more
encodings and we have the concept of script_encoding and
internal_encoding that is used both in the engine and in mbstring.
Currently internal_encoding isn't checked by htmlspecialchars. If you
pass it '' it checks script_encoding and default_charset which is a bit
odd since neither directly relate to the encoding of the internal data
you are feeding to it. So maybe a way to tackle this is to use the
mbstring internal encoding when it is set as the htmlspecialchars
default when it is called without an encoding arg.
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Pierre Joye
Re: [PHP-DEV] default charset confusion March 12, 2012 09:30PM |
hi Rasmus,
On Mon, Mar 12, 2012 at 9:12 PM, Rasmus Lerdorf <[email protected]> wrote:
> If everything was UTF-8 we wouldn't have any of these issues.
> Unfortunately that isn't the case. The question is what to do with apps
> that need to deal with non UTF-8 data. Are we going to provide any help
> to them beyond just telling them to convert everything to UTF-8?
That's not really an acceptable solution, obviously.
> We took steps in 5.4 to improve htmlspecialchars to understand more
> encodings and we have the concept of script_encoding and
> internal_encoding that is used both in the engine and in mbstring.
>
> Currently internal_encoding isn't checked by htmlspecialchars. If you
> pass it '' it checks script_encoding and default_charset which is a bit
> odd since neither directly relate to the encoding of the internal data
> you are feeding to it. So maybe a way to tackle this is to use the
> mbstring internal encoding when it is set as the htmlspecialchars
> default when it is called without an encoding arg.
That's why I would prefer to use an existing setting and clearly
document it instead of creating a new ini settings with a totally
different impact than the existing ones. Not sure which one would fit
best tho'.
Reading these last two paragraphs gave me a headache and I did not
know anymore which encoding we were talking about ;-)
Cheers,
--
Pierre
@pierrejoye | http://blog.thepimp.net | http://www.libgd.org
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
On Mon, Mar 12, 2012 at 9:12 PM, Rasmus Lerdorf <[email protected]> wrote:
> If everything was UTF-8 we wouldn't have any of these issues.
> Unfortunately that isn't the case. The question is what to do with apps
> that need to deal with non UTF-8 data. Are we going to provide any help
> to them beyond just telling them to convert everything to UTF-8?
That's not really an acceptable solution, obviously.
> We took steps in 5.4 to improve htmlspecialchars to understand more
> encodings and we have the concept of script_encoding and
> internal_encoding that is used both in the engine and in mbstring.
>
> Currently internal_encoding isn't checked by htmlspecialchars. If you
> pass it '' it checks script_encoding and default_charset which is a bit
> odd since neither directly relate to the encoding of the internal data
> you are feeding to it. So maybe a way to tackle this is to use the
> mbstring internal encoding when it is set as the htmlspecialchars
> default when it is called without an encoding arg.
That's why I would prefer to use an existing setting and clearly
document it instead of creating a new ini settings with a totally
different impact than the existing ones. Not sure which one would fit
best tho'.
Reading these last two paragraphs gave me a headache and I did not
know anymore which encoding we were talking about ;-)
Cheers,
--
Pierre
@pierrejoye | http://blog.thepimp.net | http://www.libgd.org
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Ángel González
Re: [PHP-DEV] default charset confusion March 12, 2012 10:30PM |
On 12/03/12 20:51, Stas Malyshev wrote:
> Hi!
>
>> But you can't necessarily hardcode the encoding if you are writing
>> portable code. That's a bit like hardcoding a timezone. In order to
>> write portable code you need to give people the ability to localize it.
>
> No, it's not like timezone at all. I have to support all timezones in
> a global app, but I don't have to internally support every encoding on
> Earth - having everything internally in UTF-8 works quite well, and a
> lot of applications do exactly that - they have everything internally
> in UTF-8 and only may convert when importing or exporting the data. I
> don't see anything in using UTF-8 throughout the app/library that
> makes it non-portable. However, if we allow to change defaults in
> htmlspecialchars() etc. that essentially makes having defaults useless
> as I'd have so explicitly specify UTF-8 each time - otherwise it's a
> gamble what encoding I'd actually get.
If you are a framework developer, and really want to shield against a
bad php.ini setting, you could ini_set() to your prefered charset at the
beginning of the request.
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> Hi!
>
>> But you can't necessarily hardcode the encoding if you are writing
>> portable code. That's a bit like hardcoding a timezone. In order to
>> write portable code you need to give people the ability to localize it.
>
> No, it's not like timezone at all. I have to support all timezones in
> a global app, but I don't have to internally support every encoding on
> Earth - having everything internally in UTF-8 works quite well, and a
> lot of applications do exactly that - they have everything internally
> in UTF-8 and only may convert when importing or exporting the data. I
> don't see anything in using UTF-8 throughout the app/library that
> makes it non-portable. However, if we allow to change defaults in
> htmlspecialchars() etc. that essentially makes having defaults useless
> as I'd have so explicitly specify UTF-8 each time - otherwise it's a
> gamble what encoding I'd actually get.
If you are a framework developer, and really want to shield against a
bad php.ini setting, you could ini_set() to your prefered charset at the
beginning of the request.
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Stas Malyshev
Re: [PHP-DEV] default charset confusion March 12, 2012 10:40PM |
Hi!
> If you are a framework developer, and really want to shield against a
> bad php.ini setting, you could ini_set() to your prefered charset at the
> beginning of the request.
That assuming "the request" is completely processed by your framework
and you never call any outside code and any outside code never calls you
- otherwise your messing with INI setting may very well break that code
or that code's messing with INI settings may very well break yours.
--
Stanislav Malyshev, Software Architect
SugarCRM: http://www.sugarcrm.com/
(408)454-6900 ext. 227
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> If you are a framework developer, and really want to shield against a
> bad php.ini setting, you could ini_set() to your prefered charset at the
> beginning of the request.
That assuming "the request" is completely processed by your framework
and you never call any outside code and any outside code never calls you
- otherwise your messing with INI setting may very well break that code
or that code's messing with INI settings may very well break yours.
--
Stanislav Malyshev, Software Architect
SugarCRM: http://www.sugarcrm.com/
(408)454-6900 ext. 227
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Stas Malyshev
Re: [PHP-DEV] default charset confusion March 13, 2012 12:30AM |
Hi!
> Still, that API is likely wrong: a library function written by someone
> completely unrelated to the main application shouldn't be echoing
> anything through the output. And if it's not generating the html, the
> htmlspecialchars is better done from the return at the calling
> application (probably after converting the internal charset).
Again, you making a huge amount of assumptions about how ALL the
applications must work, which means you are wrong in 99.(9)% of cases,
because there's infinitely many applications which don't work exactly
like yours does, and we have no idea how they work.
The main point is that having global state (and yet worse, changeable
global state) significantly influence how basic functions are working is
dangerous. It's like keeping everything in globals and instead of
passing parameters between functions just change some globals and expect
functions to pick it up.
> Such interfaces may be well served by switching the setting many times.
That's exactly what I am trying to avoid, and you are just illustrating
why this proposal is dangerous - because that's exactly what is going to
happen in the code, instead of passing proper arguments to
htmlspecialchars people will start changing INI settings left and right,
and then nobody would know what htmlspecialchars() call actually does
without tracking all the INI changes along the way.
--
Stanislav Malyshev, Software Architect
SugarCRM: http://www.sugarcrm.com/
(408)454-6900 ext. 227
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> Still, that API is likely wrong: a library function written by someone
> completely unrelated to the main application shouldn't be echoing
> anything through the output. And if it's not generating the html, the
> htmlspecialchars is better done from the return at the calling
> application (probably after converting the internal charset).
Again, you making a huge amount of assumptions about how ALL the
applications must work, which means you are wrong in 99.(9)% of cases,
because there's infinitely many applications which don't work exactly
like yours does, and we have no idea how they work.
The main point is that having global state (and yet worse, changeable
global state) significantly influence how basic functions are working is
dangerous. It's like keeping everything in globals and instead of
passing parameters between functions just change some globals and expect
functions to pick it up.
> Such interfaces may be well served by switching the setting many times.
That's exactly what I am trying to avoid, and you are just illustrating
why this proposal is dangerous - because that's exactly what is going to
happen in the code, instead of passing proper arguments to
htmlspecialchars people will start changing INI settings left and right,
and then nobody would know what htmlspecialchars() call actually does
without tracking all the INI changes along the way.
--
Stanislav Malyshev, Software Architect
SugarCRM: http://www.sugarcrm.com/
(408)454-6900 ext. 227
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Yasuo Ohgaki
Re: [PHP-DEV] default charset confusion March 13, 2012 02:00AM |
2012/3/13 Rasmus Lerdorf <[email protected]>:
> On 03/12/2012 03:05 AM, Yasuo Ohgaki wrote:
>> I thought default_charset became UTF-8, so I was expecting
>> following HTTP header.
>>
>> content-type text/html; charset=UTF-8
>>
>> However, I got empty charset (missing 'charset=UTF-8').
>> So I looked up to source and found the line in SAPI.h
>>
>> 293 #define SAPI_DEFAULT_CHARSET ""
>>
>> Empty string should be "UTF-8", isn't it?
>
> No, we can't force an output charset on people since it would end up
> breaking a lot of sites.
Right, so may be for the next major release? 5.5.0?
As the first XSS advisory in 2000 states, explicitly setting char coding will
prevent certain XSS. Recent browsers have much better encoding handing,
but setting encoding explicitly is better for security still.
> PHP 5.3's determine_charset behaves exactly like 5.4's. In 5.3 we have:
>
> if (charset_hint == NULL)
> return cs_8859_1;
>
> and in 5.4 we have:
>
> if (charset_hint == NULL)
> return cs_utf_8;
>
> So there is no difference in their guessing when there is no hint, the
> only difference is that in 5.4 we choose utf8 and in 5.3 we choose
> 8859-1 in that case.
I got this with 5.3
<?php
echo htmlentities('<日本語UTF-8>',ENT_QUOTES);
echo htmlentities('<日本語UTF-8>',ENT_QUOTES, 'UTF-8');
<���UTF8
><日本語UTF-8>
So people migrating from 5.3 to 5.4 should not have problems.
Migration older than 5.3 to 5.4 will be problematic.
I always set all parameters for htmlentities/htmlspecialchars, therefore
I haven't noticed this was changed from 5.3. They may be migrating from
5.2 or older. (RHEL5 uses 5.1)
Since PHP does not have default multibyte module, it may be good for having
input_encoding
internal_encoding
output_encoding
php.ini settings and make multibyte modules use them when they are set.
Or just make mbstring default, alternatively.
Rather big change for released version, but this is simple easy change.
Regards,
--
Yasuo Ohgaki
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> On 03/12/2012 03:05 AM, Yasuo Ohgaki wrote:
>> I thought default_charset became UTF-8, so I was expecting
>> following HTTP header.
>>
>> content-type text/html; charset=UTF-8
>>
>> However, I got empty charset (missing 'charset=UTF-8').
>> So I looked up to source and found the line in SAPI.h
>>
>> 293 #define SAPI_DEFAULT_CHARSET ""
>>
>> Empty string should be "UTF-8", isn't it?
>
> No, we can't force an output charset on people since it would end up
> breaking a lot of sites.
Right, so may be for the next major release? 5.5.0?
As the first XSS advisory in 2000 states, explicitly setting char coding will
prevent certain XSS. Recent browsers have much better encoding handing,
but setting encoding explicitly is better for security still.
> PHP 5.3's determine_charset behaves exactly like 5.4's. In 5.3 we have:
>
> if (charset_hint == NULL)
> return cs_8859_1;
>
> and in 5.4 we have:
>
> if (charset_hint == NULL)
> return cs_utf_8;
>
> So there is no difference in their guessing when there is no hint, the
> only difference is that in 5.4 we choose utf8 and in 5.3 we choose
> 8859-1 in that case.
I got this with 5.3
<?php
echo htmlentities('<日本語UTF-8>',ENT_QUOTES);
echo htmlentities('<日本語UTF-8>',ENT_QUOTES, 'UTF-8');
<���UTF8
><日本語UTF-8>
So people migrating from 5.3 to 5.4 should not have problems.
Migration older than 5.3 to 5.4 will be problematic.
I always set all parameters for htmlentities/htmlspecialchars, therefore
I haven't noticed this was changed from 5.3. They may be migrating from
5.2 or older. (RHEL5 uses 5.1)
Since PHP does not have default multibyte module, it may be good for having
input_encoding
internal_encoding
output_encoding
php.ini settings and make multibyte modules use them when they are set.
Or just make mbstring default, alternatively.
Rather big change for released version, but this is simple easy change.
Regards,
--
Yasuo Ohgaki
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Rasmus Lerdorf
Re: [PHP-DEV] default charset confusion March 13, 2012 02:40AM |
On 03/12/2012 05:52 PM, Yasuo Ohgaki wrote:
> I always set all parameters for htmlentities/htmlspecialchars, therefore
> I haven't noticed this was changed from 5.3. They may be migrating from
> 5.2 or older. (RHEL5 uses 5.1)
No, like I showed, moving from 5.3 to 5.4 breaks because the new default
UTF-8 encoding validates the input and 8859-1 in 5.3 does not. So for
charsets that are actually safe for the low-ascii chars that are
significant to html htmlspecialchars() now returns false in 5.4 because
their chars fail the UTF8 validity check. For people who explicitly set
all the parameters nothing has changed, of course.
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> I always set all parameters for htmlentities/htmlspecialchars, therefore
> I haven't noticed this was changed from 5.3. They may be migrating from
> 5.2 or older. (RHEL5 uses 5.1)
No, like I showed, moving from 5.3 to 5.4 breaks because the new default
UTF-8 encoding validates the input and 8859-1 in 5.3 does not. So for
charsets that are actually safe for the low-ascii chars that are
significant to html htmlspecialchars() now returns false in 5.4 because
their chars fail the UTF8 validity check. For people who explicitly set
all the parameters nothing has changed, of course.
-Rasmus
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Christian Schneider
Re: [PHP-DEV] default charset confusion March 13, 2012 03:30PM |
Am 13.03.2012, 02:34 Uhr, schrieb Rasmus Lerdorf <[email protected]>:
> On 03/12/2012 05:52 PM, Yasuo Ohgaki wrote:
>> I always set all parameters for htmlentities/htmlspecialchars, therefore
>> I haven't noticed this was changed from 5.3. They may be migrating from
>> 5.2 or older. (RHEL5 uses 5.1)
>
> No, like I showed, moving from 5.3 to 5.4 breaks because the new default
> UTF-8 encoding validates the input and 8859-1 in 5.3 does not. So for
> charsets that are actually safe for the low-ascii chars that are
> significant to html htmlspecialchars() now returns false in 5.4 because
> their chars fail the UTF8 validity check. For people who explicitly set
> all the parameters nothing has changed, of course.
I second that. It causes us big PITA because we're still using 8859-1
(shame
on us) and it is made even worse because the encoding parameter is after
the
(optional) flags parameter which now has to be given too.
The sane version from my naive point of view would be to honor
default_charset
if nothing is given. That's what I expected when I read the migration
guide.
- Chris
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> On 03/12/2012 05:52 PM, Yasuo Ohgaki wrote:
>> I always set all parameters for htmlentities/htmlspecialchars, therefore
>> I haven't noticed this was changed from 5.3. They may be migrating from
>> 5.2 or older. (RHEL5 uses 5.1)
>
> No, like I showed, moving from 5.3 to 5.4 breaks because the new default
> UTF-8 encoding validates the input and 8859-1 in 5.3 does not. So for
> charsets that are actually safe for the low-ascii chars that are
> significant to html htmlspecialchars() now returns false in 5.4 because
> their chars fail the UTF8 validity check. For people who explicitly set
> all the parameters nothing has changed, of course.
I second that. It causes us big PITA because we're still using 8859-1
(shame
on us) and it is made even worse because the encoding parameter is after
the
(optional) flags parameter which now has to be given too.
The sane version from my naive point of view would be to honor
default_charset
if nothing is given. That's what I expected when I read the migration
guide.
- Chris
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Richard Lynch
Re: [PHP-DEV] default charset confusion March 13, 2012 03:40PM |
On Mon, March 12, 2012 2:44 pm, Rasmus Lerdorf wrote:
> But you can't necessarily hardcode the encoding if you are writing
> portable code. That's a bit like hardcoding a timezone. In order to
> write portable code you need to give people the ability to localize
> it.
If you wanted it portable, wouldn't you need to have a variable there,
so it can survive the ISO-8859-1 to UTF-8 change, and to allow people
to change it despite whatever non-standard setting might happen to be
in somebody else's php.ini?
I mean, sure, it's nice if it "just works" for the folks who want to
install and have it localized for their own charset hard-coded in
php.ini, but if it's being multi-national website, you have to pass in
a variable there, which seems the more portable option to this naive
reader.
Having it default to whatever happens to be in php.ini only solves the
use case of people who only want to serve up their content in their
own charset.
I'd have to agree with Stas that everybody should start passing in a
variable there, that can be set somewhere in a config, or, perhaps,
would DEFAULT to, errrr...
You can't default to a function call.
ANOTHER magic constant like __INI_CHARSET__ ???
That's probably a bad idea...
--
brain cancer update:
http://richardlynch.blogspot.com/search/label/brain%20tumor
Donate:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FS9NLTNEEKWBE
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> But you can't necessarily hardcode the encoding if you are writing
> portable code. That's a bit like hardcoding a timezone. In order to
> write portable code you need to give people the ability to localize
> it.
If you wanted it portable, wouldn't you need to have a variable there,
so it can survive the ISO-8859-1 to UTF-8 change, and to allow people
to change it despite whatever non-standard setting might happen to be
in somebody else's php.ini?
I mean, sure, it's nice if it "just works" for the folks who want to
install and have it localized for their own charset hard-coded in
php.ini, but if it's being multi-national website, you have to pass in
a variable there, which seems the more portable option to this naive
reader.
Having it default to whatever happens to be in php.ini only solves the
use case of people who only want to serve up their content in their
own charset.
I'd have to agree with Stas that everybody should start passing in a
variable there, that can be set somewhere in a config, or, perhaps,
would DEFAULT to, errrr...
You can't default to a function call.
ANOTHER magic constant like __INI_CHARSET__ ???
That's probably a bad idea...
--
brain cancer update:
http://richardlynch.blogspot.com/search/label/brain%20tumor
Donate:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FS9NLTNEEKWBE
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
Tomas Kuliavas
Re: [PHP-DEV] default charset confusion March 13, 2012 06:50PM |
2012.03.13 16:38 Richard Lynch rašė:
> I'd have to agree with Stas that everybody should start passing in a
> variable there, that can be set somewhere in a config, or, perhaps,
> would DEFAULT to, errrr...
You do realize that suggestions on this thread and original bug reporter
failed to make correct decisions about values that should be used to
migrate original function to PHP 5.4 compatible syntax?
htmlspecialchars without arguments does not default to ENT_QUOTES or NULL.
Failure to choose proper second argument value will lead to different
exploit or data corruption.
> You can't default to a function call.
Changing default in function was bad idea.
Ignoring bug reports about f....ed up documentation and closing them with
bogus explanations might not be bad idea, but it really helps in
alienating your developer base.
--
Tomas
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> I'd have to agree with Stas that everybody should start passing in a
> variable there, that can be set somewhere in a config, or, perhaps,
> would DEFAULT to, errrr...
You do realize that suggestions on this thread and original bug reporter
failed to make correct decisions about values that should be used to
migrate original function to PHP 5.4 compatible syntax?
htmlspecialchars without arguments does not default to ENT_QUOTES or NULL.
Failure to choose proper second argument value will lead to different
exploit or data corruption.
> You can't default to a function call.
Changing default in function was bad idea.
Ignoring bug reports about f....ed up documentation and closing them with
bogus explanations might not be bad idea, but it really helps in
alienating your developer base.
--
Tomas
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
|
jpauli
Re: [PHP-DEV] default charset confusion March 14, 2012 03:00PM |
On Tue, Mar 13, 2012 at 1:52 AM, Yasuo Ohgaki <[email protected]> wrote:
> 2012/3/13 Rasmus Lerdorf <[email protected]>:
> > On 03/12/2012 03:05 AM, Yasuo Ohgaki wrote:
> >> I thought default_charset became UTF-8, so I was expecting
> >> following HTTP header.
> >>
> >> content-type text/html; charset=UTF-8
> >>
> >> However, I got empty charset (missing 'charset=UTF-8').
> >> So I looked up to source and found the line in SAPI.h
> >>
> >> 293 #define SAPI_DEFAULT_CHARSET ""
> >>
> >> Empty string should be "UTF-8", isn't it?
> >
> > No, we can't force an output charset on people since it would end up
> > breaking a lot of sites.
>
> Right, so may be for the next major release? 5.5.0?
>
> As the first XSS advisory in 2000 states, explicitly setting char coding
> will
> prevent certain XSS. Recent browsers have much better encoding handing,
> but setting encoding explicitly is better for security still.
>
> > PHP 5.3's determine_charset behaves exactly like 5.4's. In 5.3 we have:
> >
> > if (charset_hint == NULL)
> > return cs_8859_1;
> >
> > and in 5.4 we have:
> >
> > if (charset_hint == NULL)
> > return cs_utf_8;
> >
> > So there is no difference in their guessing when there is no hint, the
> > only difference is that in 5.4 we choose utf8 and in 5.3 we choose
> > 8859-1 in that case.
>
> I got this with 5.3
> <?php
> echo htmlentities('<日本語UTF-8>',ENT_QUOTES);
> echo htmlentities('<日本語UTF-8>',ENT_QUOTES, 'UTF-8');
>
> <���UTF8
> ><日本語UTF-8>
>
> So people migrating from 5.3 to 5.4 should not have problems.
> Migration older than 5.3 to 5.4 will be problematic.
>
> I always set all parameters for htmlentities/htmlspecialchars, therefore
> I haven't noticed this was changed from 5.3. They may be migrating from
> 5.2 or older. (RHEL5 uses 5.1)
>
> Since PHP does not have default multibyte module, it may be good for having
>
> input_encoding
> internal_encoding
> output_encoding
>
>
I would then propose to make mbstring compile time mandatory.
I'm against yet another global ini setting, I find the actual ini settings
confusing enough to add one more that would moreover reflect mbstring one's
(and add more and more confusion).
Why not turn ext/mbstring mandatory at compile time, for all future PHP
versions, like preg or spl are ?
We do need multibyte handling either. ZendEngine takes advantage of
mbstring for internal encoding as well, so I probably missed something as
why it is still possible to --disable-mbstring (or not add
--enable-mbstring) when compiling ? Has it a huge performance impact ?
Thank you :)
Julien.P
> 2012/3/13 Rasmus Lerdorf <[email protected]>:
> > On 03/12/2012 03:05 AM, Yasuo Ohgaki wrote:
> >> I thought default_charset became UTF-8, so I was expecting
> >> following HTTP header.
> >>
> >> content-type text/html; charset=UTF-8
> >>
> >> However, I got empty charset (missing 'charset=UTF-8').
> >> So I looked up to source and found the line in SAPI.h
> >>
> >> 293 #define SAPI_DEFAULT_CHARSET ""
> >>
> >> Empty string should be "UTF-8", isn't it?
> >
> > No, we can't force an output charset on people since it would end up
> > breaking a lot of sites.
>
> Right, so may be for the next major release? 5.5.0?
>
> As the first XSS advisory in 2000 states, explicitly setting char coding
> will
> prevent certain XSS. Recent browsers have much better encoding handing,
> but setting encoding explicitly is better for security still.
>
> > PHP 5.3's determine_charset behaves exactly like 5.4's. In 5.3 we have:
> >
> > if (charset_hint == NULL)
> > return cs_8859_1;
> >
> > and in 5.4 we have:
> >
> > if (charset_hint == NULL)
> > return cs_utf_8;
> >
> > So there is no difference in their guessing when there is no hint, the
> > only difference is that in 5.4 we choose utf8 and in 5.3 we choose
> > 8859-1 in that case.
>
> I got this with 5.3
> <?php
> echo htmlentities('<日本語UTF-8>',ENT_QUOTES);
> echo htmlentities('<日本語UTF-8>',ENT_QUOTES, 'UTF-8');
>
> <���UTF8
> ><日本語UTF-8>
>
> So people migrating from 5.3 to 5.4 should not have problems.
> Migration older than 5.3 to 5.4 will be problematic.
>
> I always set all parameters for htmlentities/htmlspecialchars, therefore
> I haven't noticed this was changed from 5.3. They may be migrating from
> 5.2 or older. (RHEL5 uses 5.1)
>
> Since PHP does not have default multibyte module, it may be good for having
>
> input_encoding
> internal_encoding
> output_encoding
>
>
I would then propose to make mbstring compile time mandatory.
I'm against yet another global ini setting, I find the actual ini settings
confusing enough to add one more that would moreover reflect mbstring one's
(and add more and more confusion).
Why not turn ext/mbstring mandatory at compile time, for all future PHP
versions, like preg or spl are ?
We do need multibyte handling either. ZendEngine takes advantage of
mbstring for internal encoding as well, so I probably missed something as
why it is still possible to --disable-mbstring (or not add
--enable-mbstring) when compiling ? Has it a huge performance impact ?
Thank you :)
Julien.P
|
Ferenc Kovacs
Re: [PHP-DEV] default charset confusion March 14, 2012 03:30PM |
>
>
> I would then propose to make mbstring compile time mandatory.
>
> I'm against yet another global ini setting, I find the actual ini settings
> confusing enough to add one more that would moreover reflect mbstring one's
> (and add more and more confusion).
> Why not turn ext/mbstring mandatory at compile time, for all future PHP
> versions, like preg or spl are ?
>
> We do need multibyte handling either. ZendEngine takes advantage of
> mbstring for internal encoding as well, so I probably missed something as
> why it is still possible to --disable-mbstring (or not add
> --enable-mbstring) when compiling ? Has it a huge performance impact ?
>
> Thank you :)
>
> Julien.P
>
see
http://www.mail-archive.com/[email protected]/msg48452.html
http://lxr.php.net/opengrok/xref/PHP_5_4/UPGRADING#91
and
http://www.mail-archive.com/[email protected]/msg53863.html
basically the mbstring code in the ZE is only used if you
enable zend.multibyte, which is disabled by default, so it isn't mandatory
to have ext/mbstring for the default build/setup.
as you can see from the last link, I would support having ext/mbstring
builtin and always enabled, but I would like to hear from more people about
the pros and cons.
--
Ferenc Kovács
@Tyr43l - http://tyrael.hu
>
> I would then propose to make mbstring compile time mandatory.
>
> I'm against yet another global ini setting, I find the actual ini settings
> confusing enough to add one more that would moreover reflect mbstring one's
> (and add more and more confusion).
> Why not turn ext/mbstring mandatory at compile time, for all future PHP
> versions, like preg or spl are ?
>
> We do need multibyte handling either. ZendEngine takes advantage of
> mbstring for internal encoding as well, so I probably missed something as
> why it is still possible to --disable-mbstring (or not add
> --enable-mbstring) when compiling ? Has it a huge performance impact ?
>
> Thank you :)
>
> Julien.P
>
see
http://www.mail-archive.com/[email protected]/msg48452.html
http://lxr.php.net/opengrok/xref/PHP_5_4/UPGRADING#91
and
http://www.mail-archive.com/[email protected]/msg53863.html
basically the mbstring code in the ZE is only used if you
enable zend.multibyte, which is disabled by default, so it isn't mandatory
to have ext/mbstring for the default build/setup.
as you can see from the last link, I would support having ext/mbstring
builtin and always enabled, but I would like to hear from more people about
the pros and cons.
--
Ferenc Kovács
@Tyr43l - http://tyrael.hu
|
Michael Stowe
Re: [PHP-DEV] default charset confusion March 14, 2012 03:40PM |
Correct me if I'm wrong, but I believe Zend Multibyte is now enabled by
default in PHP 5.4.
- Mike
On Wed, Mar 14, 2012 at 9:24 AM, Ferenc Kovacs <tyra3l@gmail[email protected]> wrote:
> >
> >
> > I would then propose to make mbstring compile time mandatory.
> >
> > I'm against yet another global ini setting, I find the actual ini
> settings
> > confusing enough to add one more that would moreover reflect mbstring
> one's
> > (and add more and more confusion).
> > Why not turn ext/mbstring mandatory at compile time, for all future PHP
> > versions, like preg or spl are ?
> >
> > We do need multibyte handling either. ZendEngine takes advantage of
> > mbstring for internal encoding as well, so I probably missed something as
> > why it is still possible to --disable-mbstring (or not add
> > --enable-mbstring) when compiling ? Has it a huge performance impact ?
> >
> > Thank you :)
> >
> > Julien.P
> >
>
> see
> http://www.mail-archive.com/[email protected]/msg48452.html
> http://lxr.php.net/opengrok/xref/PHP_5_4/UPGRADING#91
> and
> http://www.mail-archive.com/[email protected]/msg53863.html
>
> basically the mbstring code in the ZE is only used if you
> enable zend.multibyte, which is disabled by default, so it isn't mandatory
> to have ext/mbstring for the default build/setup.
> as you can see from the last link, I would support having ext/mbstring
> builtin and always enabled, but I would like to hear from more people about
> the pros and cons.
>
> --
> Ferenc Kovács
> @Tyr43l - http://tyrael.hu
>
--
-----------------------
"My command is this: Love each other as I
have loved you." John 15:12
-----------------------
default in PHP 5.4.
- Mike
On Wed, Mar 14, 2012 at 9:24 AM, Ferenc Kovacs <tyra3l@gmail[email protected]> wrote:
> >
> >
> > I would then propose to make mbstring compile time mandatory.
> >
> > I'm against yet another global ini setting, I find the actual ini
> settings
> > confusing enough to add one more that would moreover reflect mbstring
> one's
> > (and add more and more confusion).
> > Why not turn ext/mbstring mandatory at compile time, for all future PHP
> > versions, like preg or spl are ?
> >
> > We do need multibyte handling either. ZendEngine takes advantage of
> > mbstring for internal encoding as well, so I probably missed something as
> > why it is still possible to --disable-mbstring (or not add
> > --enable-mbstring) when compiling ? Has it a huge performance impact ?
> >
> > Thank you :)
> >
> > Julien.P
> >
>
> see
> http://www.mail-archive.com/[email protected]/msg48452.html
> http://lxr.php.net/opengrok/xref/PHP_5_4/UPGRADING#91
> and
> http://www.mail-archive.com/[email protected]/msg53863.html
>
> basically the mbstring code in the ZE is only used if you
> enable zend.multibyte, which is disabled by default, so it isn't mandatory
> to have ext/mbstring for the default build/setup.
> as you can see from the last link, I would support having ext/mbstring
> builtin and always enabled, but I would like to hear from more people about
> the pros and cons.
>
> --
> Ferenc Kovács
> @Tyr43l - http://tyrael.hu
>
--
-----------------------
"My command is this: Love each other as I
have loved you." John 15:12
-----------------------
|
Ferenc Kovacs
Re: [PHP-DEV] default charset confusion March 14, 2012 03:40PM |
On Wed, Mar 14, 2012 at 3:29 PM, Michael Stowe <[email protected]> wrote:
> Correct me if I'm wrong, but I believe Zend Multibyte is now enabled by
> default in PHP 5.4.
>
> - Mike
>
>
http://lxr.php.net/opengrok/xref/PHP_5_4/UPGRADING#91
http://lxr.php.net/opengrok/xref/PHP_5_4/Zend/zend.c#108
http://lxr.php.net/opengrok/xref/PHP_5_4/php.ini-development#358
http://lxr.php.net/opengrok/xref/PHP_5_4/php.ini-production#358
we just moved the switch from compilation time to runtime, so the code is
there, if you want to enable it, you don't have to recompile php but only
have to change an ini setting, but it isn't turned on by default.
AFAIK
--
Ferenc Kovács
@Tyr43l - http://tyrael.hu
> Correct me if I'm wrong, but I believe Zend Multibyte is now enabled by
> default in PHP 5.4.
>
> - Mike
>
>
http://lxr.php.net/opengrok/xref/PHP_5_4/UPGRADING#91
http://lxr.php.net/opengrok/xref/PHP_5_4/Zend/zend.c#108
http://lxr.php.net/opengrok/xref/PHP_5_4/php.ini-development#358
http://lxr.php.net/opengrok/xref/PHP_5_4/php.ini-production#358
we just moved the switch from compilation time to runtime, so the code is
there, if you want to enable it, you don't have to recompile php but only
have to change an ini setting, but it isn't turned on by default.
AFAIK
--
Ferenc Kovács
@Tyr43l - http://tyrael.hu
|
Gustavo Lopes
Re: [PHP-DEV] default charset confusion March 14, 2012 03:40PM |
On Wed, 14 Mar 2012 14:55:17 +0100, jpauli <[email protected]> wrote:
> I would then propose to make mbstring compile time mandatory.
>
I'm completely against these kind of lazy solutions. Yes, let's add strong
coupling (already starting to smell) to one of the largest extensions and
make it compile time mandatory because it simplifies the implementation of
a dubiously useful feature like Zend multibyte. Remember PHP is sometimes
used in environments with limited memory/disk space.
Also mbstring takes a long time to build (relatively speaking). Just that
would be a strong argument against making it mandatory, at least for
people like me that compile PHP with --disable-all very frequently.
> I'm against yet another global ini setting, I find the actual ini
> settings confusing enough to add one more that would moreover reflect
> mbstring one's (and add more and more confusion).
> Why not turn ext/mbstring mandatory at compile time, for all future PHP
> versions, like preg or spl are ?
>
> We do need multibyte handling either. ZendEngine takes advantage of
> mbstring for internal encoding as well, so I probably missed something as
> why it is still possible to --disable-mbstring (or not add
> --enable-mbstring) when compiling ? Has it a huge performance impact ?
>
mbstring hooks to basically all phases of PHP process/request
startup/shutdown. Some efforts were made to mitigate the impact of this in
5.4 (see e.g. r301068), but at least some impact is inevitable. Of course,
if you start enabling certain features of mbstring (zend multibyte hooks,
translation of input variables, function overload) then it starts to be
significant. However, there are other more compelling reasons not to make
it required (see above).
--
Gustavo Lopes
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
> I would then propose to make mbstring compile time mandatory.
>
I'm completely against these kind of lazy solutions. Yes, let's add strong
coupling (already starting to smell) to one of the largest extensions and
make it compile time mandatory because it simplifies the implementation of
a dubiously useful feature like Zend multibyte. Remember PHP is sometimes
used in environments with limited memory/disk space.
Also mbstring takes a long time to build (relatively speaking). Just that
would be a strong argument against making it mandatory, at least for
people like me that compile PHP with --disable-all very frequently.
> I'm against yet another global ini setting, I find the actual ini
> settings confusing enough to add one more that would moreover reflect
> mbstring one's (and add more and more confusion).
> Why not turn ext/mbstring mandatory at compile time, for all future PHP
> versions, like preg or spl are ?
>
> We do need multibyte handling either. ZendEngine takes advantage of
> mbstring for internal encoding as well, so I probably missed something as
> why it is still possible to --disable-mbstring (or not add
> --enable-mbstring) when compiling ? Has it a huge performance impact ?
>
mbstring hooks to basically all phases of PHP process/request
startup/shutdown. Some efforts were made to mitigate the impact of this in
5.4 (see e.g. r301068), but at least some impact is inevitable. Of course,
if you start enabling certain features of mbstring (zend multibyte hooks,
translation of input variables, function overload) then it starts to be
significant. However, there are other more compelling reasons not to make
it required (see above).
--
Gustavo Lopes
--
PHP Internals - PHP Runtime Development Mailing List
To unsubscribe, visit: http://www.php.net/unsub.php
Sorry, only registered users may post in this forum.